INSTALLATION TIPS

Be sure to check out our FAQ for further details.

READY TO APPLY?

See video above or downloadable PDF.

DOWNLOADABLE PDF

STEP 1

DISCOVER THE BEST PLACE TO APPLY GUARDE

Discover the best place to apply GUARDE. What parts of your vehicle would benefit most from a protective layer? Take a moment to think about the areas you plan to target: behind door handles, near wheel arches, inside door sills, over your rear bumper, or even parts of your hood.

Measure the area of your vehicle and the decal to ensure that it will fit exactly where you want it.

Use a pair of scissors or shears to cut relief areas and customize your appliqué.

STEP 2

WIPE TARGETED AREAS

Use the provided isopropyl alcohol wipe to remove fine dirt and oils in the area you wish to apply your appliqué. One wipe will work for multiple areas.

Once you remove the alcohol wipe from the pouch, make sure you use it quickly and wipe thoroughly within minutes of opening. You can always use a lint-free cloth and isopropyl alcohol as an alternative to the wipe.

STEP 3

WASH YOUR HANDS

It is possible that some of the dirt and debris from your car may remain on your hands. Make sure that your hands are spotless before peeling off your new GUARDE appliqué

STEP 4

PEEL AND APPLY

Open and unroll your new GUARDE appliqué from the core. Then, carefully lay out your kit on a clean, flat surface and slowly remove the decal.

Be sure that it is not excessively windy or dusty while transferring your appliqué to the desired vehicle location.

Tack the decal lightly in place first. Reposition as needed until it is lined up exactly how you want. Once it is in the desired location, press firmly until the decal shows your vehicle color clearly throughout.

When you have pressed firmly around all the edges and removed any fogging, you are ready for action!